What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
Just about everyone seems to have their personal idea about Hot Water Heater Repair.
Lots of contemporary residences use an electric hot water heater for their heater, due to its comfort as well as convenience of use. Nevertheless, much like any other electrical devices, issues might develop with its usage, all of a sudden. It can be truly discouraging to wake up to a cool shower rather than a warm one or having your bath with water that isn't warm enough and even also hot. Whatever the instance may be, water heater troubles can be quite stressful. The good news is, we've made a listing of feasible services to your hot water heater concerns. There are a number of aspects that can cause much of these troubles, it could be a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you switch off the main power supply for security. Whatever the trouble is, getting it fixed should not position excessive of a concern if you adhere to these steps:
Inspect Your Power Supply:
As fundamental as this might appear, it is really necessary. Without appropriate power, your hot water heater will not work. So the first thing to do when your water instantly stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the breaker stumbled. If the circuit breaker is the problem, merely transform it off and on once again. Change any kind of broken or worn-out fuse. Evaluate the home appliance with power after these adjustments to see if it's currently working.
Inspect the Burner in the Hot Water Heater:
If it's not a power problem, then try taking a look at your burner if it is still working. Evaluate each of your heating elements to ensure the issue isn't with any one of them. If any one of them is damaged, change that component and after that inspect whether the warm water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may need to check the temperature settings on your upper thermostat. Ensure the circuit breaker is switched off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature level reset over the thermostat. This must assist heat up the water. Turn the circuit breaker back on and check if the trouble has actually been settled.
Call An Expert:
If after replacing all defective parts and also resetting your temperature level, the hot water heater still isn't working, you may need to contact a specialist plumber for an expert opinion. The problem with your heating system could be that the cold and hot faucets have been switched or it might be undersized for the amount of hot water needed in your house. Whatever the instance might be, an expert plumber would help solve the problem.
Conclusion
Hot water heater troubles are not constantly significant. Most of them result from small problems like a blown fuse or worn-out heating element. Changing the defective components must work. Nevertheless, if you are still unable to solve the trouble, give a call to your local plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed reading our article on Hot Water Heater Repair. Thanks a lot for spending some time to browse our piece. Sharing is nice. Who knows, you may be helping someone out. Many thanks for your time. Please come by our site back soon.
Or Book Technician Here
Report this page